Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PV system

Status
Not open for further replies.

Berend Kunze

Newbie level 6
Joined
Feb 13, 2023
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
56
Hello.
I'm trying to design a wind generator.
However, there is one special request.
It is to change the gear ratio of the turbine.
In other words, we are trying to cap the output of the turbine and electrically control the gear ratio of the turbine accordingly.
I'm trying to find a gear like this, can you help me?
turbine power is 500W.
thank you
 

Hi,

what about one from a bicycle?

But surely it depends on the expected gear ratio and the step count.

Klaus
 

A turbine with opposite direction can be made, sealed and filled with oil for transmission, and the gear ratio can be adjusted by the distance of the turbine. Similar to the dual-clutch gearbox of automobiles.
 

This may be more appropriate
CVT.gif
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top