Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Pulse counter with two lines with 4 digits each line

Status
Not open for further replies.

fjpompeo

Advanced Member level 1
Joined
Nov 29, 2003
Messages
415
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Brazil
Activity points
3,042
Need a kind diferent pulse counter. It may have a PIC or an AVR or even discrete CMOS/TTL ics. It must have two lines with 4 digits each line, one for total counting and other with sub total. Each line must have a separe reset or the reset for subtotal desn't clear the total counting line but when you reset total both lines are cleared. When it starts counting both lines count toghether but after the first sub-total reset, second line will star from zero but total line will increase last counting plus actual counting.

Thanks,

Fernando
 

Re: Pulse counter

Hi,
Doesn't look too complicate. You can do it with an cheap atmel 89c2051 for example. If you need tools for small sized code development you can use keil demo from www.keil.com .
 

Re: Pulse counter

Pisoiu,

Thanks for the prompt reply. I have a big problem that is I konw nothing about AVR or PIC, just a litle in digital electronics anyway nice tip.

Regards,

Fernando
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top