Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pspice simulation for X-10 Powerline Communication

Status
Not open for further replies.
dazzlingvit

dazzlingvit

Newbie level 2
Newbie level 2
Joined
Jan 20, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
vit.launchar.com
Activity points
1,292
I follow the instruction in Microchip Application Note AN236 to design a simple PLC. I simulate its modules separately to ensure that it works. But when I attach the PWM signal into the power line through a high pass filter, the power signal is still sine wave! (Of course! It's the power source, the voltage can't be changed!)
What the thing I have to do to simulate this kind of circuit in Pspice.
X10 Pspice.png
X10 Schematic.png

Thanks for your help.
Sorry for my English.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top