programmer for AT89S52 needed

[7rots51]

ponyprog at89s52

hi
I need a programmer for AT89s51(sch ,software).

thanks

 

[dainis]

pony prog at89s52

Look PonyProg:

 

[7rots51]

at89s52 programer

TO dainis:
PONYPROG DOES NOT SUPPORT AT89S52!

 

[dainis]

at89s52 ponyprog

TO dainis:
PONYPROG DOES NOT SUPPORT AT89S52!

Sorry ... only AT89S8252 and AT89S53 micro

Look:
http://www.elrasoft.com/index.htm
Atmel MCU: AT89S51, AT89S52, AT89S53 , AT89S5282 ????

**broken link removed**
**broken link removed**

Linux Atmel at89s52 and at89s53 programmer
http://www.lrlabs.com/gnu/

 

[gil]

ponyprog at89s

Hi,

you can use a Willem programer with an adaptor for AT89Cxx. It works fine and it is not expensive!

**broken link removed**

 

[boyzplus]

programer for at89s52

Hi all,

try AEC Electronics. It can program AT89S51/52/53 and AT89S8252 micros via parallel port and very simple to build, using only few resistors.

www.aec-electronics.co.uz

Cheers,
boyzplus

 

[cdcll]

willem at89s52

Hi all,

try AEC Electronics. It can program AT89S51/52/53 and AT89S8252 micros via parallel port and very simple to build, using only few resistors.

www.aec-electronics.co.uz

Cheers,
boyzplus

try this.

 

[dainis]

at89s52 programmer

Hi all,

try AEC Electronics. It can program AT89S51/52/53 and AT89S8252 micros via parallel port and very simple to build, using only few resistors.

www.aec-electronics.co.uz

Cheers,
boyzplus

Right link is:
**broken link removed**

 

[7rots51]

diy at89s52 board

hello
Does AEC Electronics DOS software work in win xp or win2000 command prompt?

It is better to have a windows software for this,is there any?

Regards

 

[dainis]

at89s52 willem

hello
Does AEC Electronics DOS software work in win xp or win2000 command prompt?

For direct I/O port access look DlPortIo
**broken link removed**
Or GiveIO:
**broken link removed**


For WinXP also try (?!?) set compatible mode for programm shortcut.

 

[maziar]

at89s52 programmer

can upload software ?

 

[dainis]

at89s53 instead at89s52

can upload software ?

What software ?
DirectIO, GiveIO, get download links from my previous post ....

 

[maziar]

mpu51 pony

can upload software ?

What software ?
DirectIO, GiveIO, get download links from my previous post ....

**broken link removed**

i send mail to it but no recive to now please anyone have it upload it

THX

 

[mrcube_ns]

ponyprog+at89s52

Here it is.

Mr.Cube

 

[dainis]

at89s52 parallel programmer

Other programmer:
**broken link removed**
**broken link removed**

 

[electrolearner]

Try SmartPro S51

If you are looking for USB programmer for 89S51 then try SmartPro S51. It supports some other variants as well as SPi Eeprom chips.

Cheers

 

[asimov]

ceck out the programmer at my home page
"http://sites.google.com/site/rohittkhanna/usbavrprogrammer"

this is a modified version of USBASP and can program AT89Sxx chips!!!
or if your PC has a parallel port use this programmer
**broken link removed**


Asimov