Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

programmable parallel I/O ports on the PICDEM2 Plus board

Status
Not open for further replies.

chilzm

Newbie level 1
Newbie level 1
Joined
Apr 24, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,286
Can anyone help with writing an ASsembly code:

to read the logic levels from the DIP switch. The input data is required to
store into a data memory location at 0x0FF. (Note: Set the ON-OFF levels of the DIP
switch arbitrarily to verify the functionality of the program)

here is the circuit schematic:





Thanks ppl
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top