[AVR] PROGRAM bmp085 WHITH AVR FAMILY SERIE ATMEGA16,32

[imannejaty]

I want to microcontroller AVR ATMEGA16 OR 32
I found my program but header to call a function of the values of temperature and pressure and height above sea level and the module to read LCD display, but no matter how header I'm calling software CODE VISION
I realized that there must be a change in the header Orem error but I do not know how to apply changes
If it's my humble advice please thank

link header bmp085 :
**broken link removed**

 

[milan.rajik]

Does it give temperature data ?

**broken link removed**

See this library. It is for BMP085 and BMP180.

https://github.com/adafruit/Adafruit-BMP085-Library

If you are using BMP180 then you can use this library.

https://learn.sparkfun.com/tutorials/bmp180-barometric-pressure-sensor-hookup-

 

[imannejaty]

Does it give temperature data ?

**broken link removed**

See this library. It is for BMP085 and BMP180.

https://github.com/adafruit/Adafruit-BMP085-Library

If you are using BMP180 then you can use this library.

https://learn.sparkfun.com/tutorials/bmp180-barometric-pressure-sensor-hookup-

I want the same error code vision software library that you've uploaded to change so that I can compile the following program

/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.0 Advanced
Automatic Program Generator
© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com

Project : 
Version : 
Date    : 4/24/2015
Author  : www.Eca.ir *** www.Webkade.ir
Company : 
Comments: 


Chip type               : ATmega16
Program type            : Application
AVR Core Clock frequency: 8.000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 256
*****************************************************/

#include <mega16.h>
#include <delay.h>
#include <bmp085.h>
// I2C Bus functions
#asm
   .equ __i2c_port=0x15 ;PORTC
   .equ __sda_bit=1
   .equ __scl_bit=0
#endasm
#include <i2c.h>


// Alphanumeric LCD Module functions
#include <alcd.h>

// Declare your global variables here
 long int pa,p=0;
 float h=0,T=0;
 char buffer [60];

void main(void)
{
// Declare your local variables here

// Input/Output Ports initialization
// Port A initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTA=0x00;
DDRA=0x00;

// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTB=0x00;
DDRB=0x00;

// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTC=0x00;
DDRC=0x00;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTD=0x00;
DDRD=0x00;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=0xFF
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;

// USART initialization
// USART disabled
UCSRB=0x00;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

// ADC initialization
// ADC disabled
ADCSRA=0x00;

// SPI initialization
// SPI disabled
SPCR=0x00;

// TWI initialization
// TWI disabled
TWCR=0x00;

// I2C Bus initialization
i2c_init();

// Alphanumeric LCD initialization
// Connections specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTA Bit 0
// RD - PORTA Bit 1
// EN - PORTA Bit 2
// D4 - PORTA Bit 4
// D5 - PORTA Bit 5
// D6 - PORTA Bit 6
// D7 - PORTA Bit 7
// Characters/line: 16
lcd_init(16);

while (1)
      {p=getPressure(&_Pa);                // pressure in Pa + offset  
  h=getAltitude(&_centimeters);       // altitude in centimeters + offset  
  T=getTemperature(&_Temperature);    // temperature in C؛   
      sprintf (buffer,"%s:%s:%s",p,T);
      lcd_clear();
      lcd_gotoxy(0,0);
      lcd_putsf("mohandes:iman.nejaty");
      lcd_gotoxy(0,1);
      lcd_puts(buffer);