Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

process porting - *WARNING* Invalid type (string)

Status
Not open for further replies.
J

jeremy_zhu

Member level 2
Joined
Aug 19, 2006
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,542
process porting

in my porting , for example smic18-->smic13,
in Scematic editing window: edit->search->replace (master mode porting).
after porting : a 4X inverter , the Multiplicity in CDF shows 1 but in netlist generated by ADE is 4 ( 4 is correct) , why the cdf is not updated correctly and in time.

and in CIW window: a warning below ocurres when you select a MOS and see the properties
(Q, bindkey)

*WARNING* Invalid type (string) for property 'm' on instance 'P0'
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top