problme with connecting two DAQ in parallel

Status
Not open for further replies.
S

sabra88

Newbie level 2
Joined
Aug 1, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
121
Hello everybody,

I have a problem in connecting two DAQ(which mesures voltage) in parallel, both with a resistance. when i connect the first DAQ, it gives me the right voltage which is 110 mV. but when i connect the second DAQ in parallel with the first DAQ, the second DAQ gives me 110 mV and the first DAQ gives me 819 mV which is the maximum of voltage that it can mesure.

Please help me because this is wierd to me.
You will find attached a scheme of my problem

 

When you say "DAQ", I''m guessing you mean an analog-to-digital converter. Without knowing anything more about your system, I would guess that one of your "DAQs" is loading the input-i.e., there are two different input impedances. I would drive each "DAQ" with a separate buffer.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…