Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problems with values in max281 filter design

Status
Not open for further replies.

femtoman

Newbie level 6
Joined
Jan 26, 2002
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
13
max281

hallo,
I have a problem with max281 IC; this is a 5th order bessel filter IC.
I find values of R an C (input signal of IC) for a 10 Hz filter.
and for a 100 hz filter?
and the CLOCK frequency?
Thanks.
Andrea.
ps. excuse me for my poor english! :oops:
 

data sheet

The data sheet **broken link removed** shows that one capacitor sets the cutoff frequency and the other capacitor controls the shape. There are equations and graphs in the data sheet that you can use to select the capacitor values.
 

Hallo,
I try with datasheet indications.
Thanks, Andrea.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top