Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problems with 2 Nokia 3310: not powering/display error

Status
Not open for further replies.

eleynika

Junior Member level 1
Joined
Jul 13, 2006
Messages
19
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
Nigeria
Activity points
1,388
3310

i'm having problems with two 3310 phones.

the first one fell into an iodine solution and i'v cleaned with a solvent(thinner) and still its not powering.

the second one powers up but refuses to display even with other screens.

need help.:?:
 

Re: 3310

for 2nd proplem :
meybe your SMPS circuit damaged. you can test SMPS's transistors.
 

3310

for ur first solution, u can give some heat on pcb properly on every Ic . Second solution is U can change ur lcd it may be damage . U also clean lcd connector .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top