Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with using ADC0804 to convert data as it is not working

Status
Not open for further replies.

ehsanelahimirza

Full Member level 6
Joined
Feb 24, 2006
Messages
336
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,567
working of adc0804

AOA and hi to all

i am using ADC0804 to convert data and use it with 89c51.
i am using it in free running mode i.e. wr rd intr are not connected to microcontroller but they are connected according to free running mode of ADC0804 data sheet.
circuit is on page#19 of data sheet.


i have tested this circuit on bread board but now when i have made PCB, no conversion i s there.

i am using 2 ADCs in my design and they are getting 2.5V DC at Vref/2 by LM336.

whats the problem there.........

thanks very much in advance
 

rikie_rizza

Full Member level 6
Joined
Aug 5, 2006
Messages
339
Helped
29
Reputation
58
Reaction score
9
Trophy points
1,298
Location
Bikini Bottom, between a rock and a pineapple
Activity points
3,173
adc0804+free running mode

how you assemble the circuit? How you draw the PCB layout? Did you solder directly or using socket? Are you sure you didn't do any mistake while drawing the circuitry? No broken wire?

If you did it with breadboard then there's an assembly problem as the first suspected problem...recheck your board, try to find broken things...anything.
 

ehsanelahimirza

Full Member level 6
Joined
Feb 24, 2006
Messages
336
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,567
adc0804 working

i have found the solution.

i was using switch to reset the ADC but using a capacitor solved the problem
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top