Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] problem with trunk routing in cadstar

Status
Not open for further replies.
P

puneethcp

Newbie level 6
Joined
Oct 3, 2012
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,360
hi...

some time in PR editor the Compose option is disable and not coming even if i restart the cadstar.
it is only enable after restarting the PC.
help me.
 

Sorry, cannot help you because I do not understand what your problem is.

Please explain it more, step by step and use the terms from in the program.
Explain what you are trying to do.
 

thankyou, actually the problem is i am not able to take the trunk routing sometimes, the problem gets solved when i restart the PC.
 

There will be a reason for it not allowing you to do it, either you are doing it wrong or there are design rules set that are preventing you and because you have it set to not allow errors it will not make one.

Have you got "allow errors" NOT ticked?

If so then tick it AND "online DRC".

P.S you do not say if it is the internal router or the external one. Same reply though.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top