Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem with silvaco atlas simulation

Status
Not open for further replies.

sharifeee01

Newbie level 3
Joined
Jul 21, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
Hello,

I have tried to define electrode as follow in silvaco atlas

electrode x.min=-0.20 x.max=-0.15 y.min=-0.04 y.max=0.0 name=nsource
electrode x.min=-0.05 x.max=0.05 y.min=-0.04 y.max=-0.03 name=ngate
electrode x.min=0.15 x.max=0.20 y.min=-0.04 y.max=0.0 name=ndrain
electrode bottom name=substrate


I did not find expected result. Is there anyone who can help me?
 

Try

electrode name=nsource x=-0.175 y=-0.02
electrode name=ngate x=0 y=-0.035
electrode name=ndrain x=0.17 y=-0.02
electrode name=substrate backside

You need only point to one x,y position inside the electrode metal.
 

electrode x.min=-0.20 x.max=-0.15 y.min=-0.04 y.max=0.0 name=nsource
electrode x.min=-0.05 x.max=0.05 y.min=-0.04 y.max=-0.03 name=ngate
electrode x.min=0.15 x.max=0.20 y.min=-0.04 y.max=0.0 name=ndrain

electrode name=nsource x.min=-0.20 length=0.05
electrode name=ngate x.min=-0.05 length=0.10
electrode name=ndrain x.min=0.15 length=0.05

I think it will work for sure for ndrain but not sure for gate and source( due to negative values
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top