adamarul
Junior Member level 3
- Joined
- Mar 26, 2009
- Messages
- 28
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Chennai,India
- Activity points
- 1,542
hi all,
i am facing a peculiar problem with serial port access.
I ve made an LED to blink when any data is received(i ve made the LED port pin toggle inside the serial ISR).I have not connected any device to serial port.when i transfer any data through the serial port,i could find the LED blinking.
However when i disable the interrupt,it is running as expected!!!!suggest me some ways to get rid of this problem.
i am facing a peculiar problem with serial port access.
I ve made an LED to blink when any data is received(i ve made the LED port pin toggle inside the serial ISR).I have not connected any device to serial port.when i transfer any data through the serial port,i could find the LED blinking.
However when i disable the interrupt,it is running as expected!!!!suggest me some ways to get rid of this problem.
