Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with pulse flickering ?

Status
Not open for further replies.

madhu.b

Member level 3
Joined
Sep 25, 2011
Messages
66
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,846
Hello,

How to solve the Pulse flickering Problem?

I have the dspic33fj06gs202 microcontroller which is getting the power supply from the voltage regulator (TLV2217) and providing the pulse to gate driver. But, Before gate driver checking the pulse which is flickering vertically.
 

iyou can use an opamp as a comparator between your microcontroller pin and gate driver and give reference voltage as one input and the other one will be your pulse i.e. pin o/p...it should remove the flicker issue and perfect square pulse can be generated...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top