tendi
Member level 5
Please can someone help upload schematic, especially the power supply section.This 29' tv just went off, no stand-by nothing!! The chassis is L 01.1A AC.
Tendi..
Tendi..
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Problem with Philips 29PT3323/79 TV
- Thread starter tendi
- Start date
- Status
poorboys_louie
Member level 1
tv +philips +29pt3323 +fuse type
HI THERE,
FIRST CHECK FOR OPEN FUSE, ALSO CHECK THE IC REGULATOR.THEN THE HORIZONTAL OUTPUT TRANSISTOR.
GUD LUCK.....
HI THERE,
FIRST CHECK FOR OPEN FUSE, ALSO CHECK THE IC REGULATOR.THEN THE HORIZONTAL OUTPUT TRANSISTOR.
GUD LUCK.....
tendi
Member level 5
29pt3323/79
THANKS A LOT FRIEND. I FIXED THE TV BY REPLACING THE MOSFET AT THE POWER SUPPLY AND IT WAS OK. APPARENTLY A COCHROACH SHORTED BETWEEN THE GATE AND THE DRAIN, DAMAGING THE 'FET.
THANKS A LOT FRIEND. I FIXED THE TV BY REPLACING THE MOSFET AT THE POWER SUPPLY AND IT WAS OK. APPARENTLY A COCHROACH SHORTED BETWEEN THE GATE AND THE DRAIN, DAMAGING THE 'FET.
- Status
