Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with Monte-Carlo Analysis

Status
Not open for further replies.

pancho_hideboo

Advanced Member level 5
Joined
Oct 21, 2006
Messages
2,856
Helped
765
Reputation
1,530
Reaction score
720
Trophy points
1,393
Location
Real Homeless
Activity points
17,467
If you would like to do MC-simulation of "Process Variation", you have to add "process variation section" in "gpdk090_mos.scs".
Here you also have to create parameters for "process variation".

As a simple approach, you can use parameters for "mismatch variation" as "process variation" directly.
But "process variation" is more large than "mismatch variation" generally.

I've three options(1.Process 2.Mismatch 3.Process&Mismatch) available in 'process variation' drop menu,
I know their meaning but I don't know their application( as where to choose these different option)
See the followings.
https://cp.literature.agilent.com/litweb/pdf/5990-3609EN.pdf
https://cp.literature.agilent.com/litweb/pdf/5990-6851EN.pdf
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top