nokia 3310 display avr
Heya
I hope my old project can help you.
This is a full Library for use your nokia LCD , all coded in C.
I have use the PIC18LF258 and it run very well.
You have to modify the Nokia_LCD.h for #define the pin you want
use for the LCD on your board.
And naturaly the TRIS in the main.c
If you want use it on a PIC16F877A then just modify the main.c
In case you want test it before coding then they is the *.hex to burn on
your 18LF258.
The pins i used for control the LCD was :
#define nok_sclk RB0 //PORTB.0
#define nok_sda RB1 //PORTB.1
#define nok_dc RB2 //PORTB.2
#define nok_cs RB3 //PORTB.3
#define nok_res RB4 //PORTB.4
Cya , and ... Enjoy.
PS : sorry for my english , i'm a little Frenchy