Dec 17, 2010 #1 L lahrach Full Member level 3 Joined Feb 6, 2009 Messages 170 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,296 Activity points 2,285 Hi friends, I use LUT6 ---------------------- M_2_U1 : LUT6 -- synthesis translate_off generic map (INIT => X"ABCDEEFF0000DD25") -- synthesis translate_on port map (O => out_1, I0 => in_0, I1 => in_1, I2 => in_2, I3 => in_3, I4 => in_4, I5 => in_5); ___________________ but in shematic view technology i get INIT=0000000000000000 regards
Hi friends, I use LUT6 ---------------------- M_2_U1 : LUT6 -- synthesis translate_off generic map (INIT => X"ABCDEEFF0000DD25") -- synthesis translate_on port map (O => out_1, I0 => in_0, I1 => in_1, I2 => in_2, I3 => in_3, I4 => in_4, I5 => in_5); ___________________ but in shematic view technology i get INIT=0000000000000000 regards
Dec 17, 2010 #2 T TrickyDicky Advanced Member level 7 Joined Jun 7, 2010 Messages 7,110 Helped 2,081 Reputation 4,181 Reaction score 2,048 Trophy points 1,393 Activity points 39,769 the -- synthesis translate_off/translate_on comments make the synthesisor ignore the code between the on/off. So it is being synthesised with the default INIT value, which I assume is "0000.."
the -- synthesis translate_off/translate_on comments make the synthesisor ignore the code between the on/off. So it is being synthesised with the default INIT value, which I assume is "0000.."
Dec 17, 2010 #3 L lahrach Full Member level 3 Joined Feb 6, 2009 Messages 170 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,296 Activity points 2,285 for the view RTL schematic it's ok but for the view technology shematic it's not