Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem with infraled receivers

Status
Not open for further replies.

freewilly30

Member level 3
Joined
Mar 5, 2005
Messages
58
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,730
i have a problem with the infra led receiver
it produces when signal is transmitted square pulses
and when not transmitted 0 dc
i want to distinguish between the 2 cases ,one tob be +ve dc'and the other 0
 

If the voltage level of the square pulses is always much higher than the noise output with no signal, you can use a comparator and then a retriggerable monostable multivibrator with a period somewhat longer tha the time between the IR pulses.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top