Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with inaccurate output ranging in AD736 RMS-DC converters

Status
Not open for further replies.
K

kishore3677

Member level 2
Joined
Jun 19, 2008
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,600
I wanted some help on using AD736 RMS-DC Converters. The problem I am facing is inaccurate output ranging from 10 mV to 120 mV for the input range of 0V to 1V RMS. That is when the input range is from 0 to 100mV RMS , the output DC varies by 10mV w.rt to input. When the input range is from 100mV to 200mV, surprisingly, the output changes by 20mV and so on. Could any one clarify about this bizzare result.

Regards
GVK
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top