Problem with importing hex files with MPLAB-IDE

[Regnum]

problem with hex file generated by mplab ide

Hi guys,

I have a problem trying to import any ".HEX" file with MPLAB 6.5, in order to program a device with PICSTART-PLUS / ICD2.

After selecting FILE/IMPORT and picking any ".HEX" file, MPLAB refuses the file, and open a window with the following message:

"The format of the file [selected filename] can not ber read or written because its extension was not recognized"

Extension is "HEX", but MPLAB doesn't recognize it.

Any ideas...?
Thanks

 

[hill]

mplab 6.5

Several hex format exist. For example INTEL16, INTEL32, swap mode or not etc. Are you sure that you have the correct one?

 

[Regnum]

Re: Problem with MPLAB-IDE

I updated MPLAB to version 6.60 and the problem went away

Thanks