Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with identifying elements

Status
Not open for further replies.

valter_ppk

Newbie level 4
Joined
Mar 17, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Poland
Activity points
1,320
Hi all,

Could you please help me with identifying elements marked as: WKX (SOT23 package), V1121 (SOP 4 package) and AL P86. All of them you can find in attached pictures.

Thank a lot for any help.
 

Attachments

  • AL P86.jpg
    AL P86.jpg
    273.9 KB · Views: 117
  • wkx.jpg
    wkx.jpg
    215.4 KB · Views: 170


Hello,

You are right with Infineon and Panasonic elements - I've checked them by multimeter, but in case of WKX I have doubts because on my board WKX is in SOT23 package and in the manual in mouser web there is no information that WKX could be in SOT23...
 

If you have a look at the datasheet I post in#2, you can find the SOT23-5 package. In the part number this is indicated by M5T1 (see page 4), so if you seach at page 34 for the code VKX you'll find the PN S-1137D31-M5T1y. Sorry, in the previous post I copied a wrong PN.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top