neoaspilet11
Full Member level 5
- Joined
- Sep 29, 2005
- Messages
- 277
- Helped
- 29
- Reputation
- 56
- Reaction score
- 8
- Trophy points
- 1,298
- Location
- Cebu, Philippines
- Activity points
- 4,048
Hello Guys,
I have a fw that communicates via a serail port using this chip. Its working fine using proteus simulation using the PIC18F6720 model. But on the actual board it wont work not even lighting a single led on an IO port.
I further checked on the rails and it seems the voltage rails are OK and the internal 2.5V regulator is working fine.
I blasted the FW and I can read it back via ICD2.
However nothing is happening on the board. it wont light up a single led nopr communicate with the port.
Any idea waht went wrong?
Thanks,
neo
I have a fw that communicates via a serail port using this chip. Its working fine using proteus simulation using the PIC18F6720 model. But on the actual board it wont work not even lighting a single led on an IO port.
I further checked on the rails and it seems the voltage rails are OK and the internal 2.5V regulator is working fine.
I blasted the FW and I can read it back via ICD2.
However nothing is happening on the board. it wont light up a single led nopr communicate with the port.
Any idea waht went wrong?
Thanks,
neo