Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with accelerometer lsm303.

Status
Not open for further replies.

Ilya Rauschenbach

Newbie level 5
Joined
Aug 21, 2015
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
45
Hi.

i use lsm303 for accelerations measuring. i want to get data rate greater then 1Hz but DRDY output switched with 1Hz only on all settings. i set LOWPOWER mode and i set NORMAL mode in registers but nothing come out.
does anyone help me?

- - - Updated - - -

i've solved the problem


The LSM303DLHC features two data-ready signals (RDY) which indicate when a new set of
measured acceleration data and magnetic data are available, therefore simplifying data
synchronization in the digital system that uses the device.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top