Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem with 16f877& icprog

Status
Not open for further replies.

nelsongutierrez

Newbie level 1
Joined
Jul 23, 2002
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
9
I can't program 16f877 with icprog, this software always show a message 'Programming failed at code address 0000h', ¿How can i solve this problem?.I have jdm programmmer
--------------------------------------------------------------------------------

Cross posting is not allowed! hc
 

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,191
Helped
247
Reputation
494
Reaction score
198
Trophy points
1,343
Location
East Of Earth
Activity points
8,916
IC PROG PIC 16F877

I am sending you the zip file contain hard ware for all pic chip to program
this is 100 % working hard ware for
Code:
[color=red][b]ic-prog[/b][/color]
[/img]
 

M!k

Advanced Member level 2
Joined
Apr 22, 2002
Messages
682
Helped
109
Reputation
218
Reaction score
35
Trophy points
1,308
Activity points
4,822
I don't know icprog, but you should pay attention to the fact that the programming algorithm for 16F877 differs from that of 16F877A.
Perhaps this helps solving your problem.

Mik
 

stefk

Member level 2
Joined
Jul 15, 2001
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
293
I use propic2 and there are no problems to program these MC.
The hardware is very simple and the software is good enough.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top