Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem when installing Cadence 5.0.3.3 on SUSE 10

Status
Not open for further replies.

Blilix

Member level 1
Joined
Feb 28, 2006
Messages
40
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,682
I try to install Cadence 5.0.3.3 on SUSE 10 but I got this problem :

Copyright 1985-1999 by Cadence Design Systems Inc.

LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.

Restricted Rights Notice to Government Users

Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.

Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA



Located CDROM at /home/cqs/pcb/SPB152_lnx86.Base/CDROM1
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/opt/SPB152

Directory /opt/SPB152 does not exist. Create? [y/n]: \c
y


Creating directory /opt/SPB152
\c

Setting up softload for lnx86 in /opt/SPB152
\c

The following tar errors were detected:
\c
/bin/tar: -b1:归档中找不到
/bin/tar: 由于前面延迟的错误而退出
/bin/tar: -b1:归档中找不到
/bin/tar: 由于前面延迟的错误而退出

Could not set up SoftLoad in /opt/SPB152\c


You must have write permissions to install directory \c
and all its subdirectories
and atleast 10 MB available disk \c
space in install directory.
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c

Is anybody know how to solve this problem?

Thanks
 

Blilix said:
I try to install Cadence 5.0.3.3 on SUSE 10 but I got this problem :

Copyright 1985-1999 by Cadence Design Systems Inc.

LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.

Restricted Rights Notice to Government Users

Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.

Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA



Located CDROM at /home/cqs/pcb/SPB152_lnx86.Base/CDROM1
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/opt/SPB152

Directory /opt/SPB152 does not exist. Create? [y/n]: \c
y


Creating directory /opt/SPB152
\c

Setting up softload for lnx86 in /opt/SPB152
\c

The following tar errors were detected:
\c
/bin/tar: -b1:归档中找不到
/bin/tar: 由于前面延迟的错误而退出
/bin/tar: -b1:归档中找不到
/bin/tar: 由于前面延迟的错误而退出

Could not set up SoftLoad in /opt/SPB152\c


You must have write permissions to install directory \c
and all its subdirectories
and atleast 10 MB available disk \c
space in install directory.
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c

Is anybody know how to solve this problem?

Thanks

search cadence in this forum, you should get complete info on how to install cadence.

your first problem is you may not have the permission to wirte files in /opt/SPB152 (I assume you were a normal user to install the program)
 

I had the same problem: Cadence instalator reports an error on "-b1" option for tar. You can solved this problem next way (as I solved it):
1. rename /bin/tar to /bin/tar2
2. create bash script file /bin/tar, that will accept all parameters except -b1 and then will call /bin/tar2 with theese parameters

That's all
 

Downgrade your tar program to 1.14 will solve your problem.
 

unzip softload program manually
then run /your_unzip_dir/softload

you might get some other problems related to "sort command"
(didn't try SUSE10 yet)

however i recommend to install under RH7.2 and get it running there
then copy to newer linux version (no guarantee that this will work!)
 

I succeed in copy ic5033 from RH8 and move it to SUSE10, but I still have the problem with cdsplotinit. I use ic5033 with NCSU CDK1.5. Any ideas?
 

Hi
Check if your drive has enough space available (df -h).

Also its not needed to downgrade the tar program just try to make a symbolic link in the same directory (to tar2) as tar program is placed now.
 

tar is too new,use a old one such as, tar-1.13.25-12.i386.rpm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top