Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem simulating wave guide from pozar book example

yefj

Advanced Member level 2
Joined
Sep 12, 2019
Messages
522
Helped
0
Reputation
0
Reaction score
2
Trophy points
18
Activity points
2,782
Hello,the hollow waveguide bellow has a=109mm b=43mm L=100mm Er=1
from the formula bellow
For TE21 i get cutoff frequency of 4.4Ghz as shown bellow.
I have defined both port on waveguide ends as shown bellow
but as you can see from simulation result is get m=2 n=1 at cutoff frequency of 2.8Ghz.
Where did i go wrong?
Thanks.
1626464698037.png

1626465924034.png


1626464549835.png


1626465212518.png

1626466402689.png
 

Attachments

  • 1626465192502.png
    1626465192502.png
    61 KB · Views: 6

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top