ponyprog programmer
Hi,
i have attached the schematics of the board, and it's PCB layout. it is only one board, all on it.
At this moment are missing from the board the folowing components:
R16, C2, C23. I just thought i should try without them. No result. Jumper JP3 is not connected (left as is).
The serial memory part of the board is therefore inexistent. When i use it i take transistor Q6 out and unconnect net6 from RB7 pins
(i did not forseen jumpers for those, unfortunately).
At this moment Q6 is present on the board and is working.
Nontheless, it should be working.
all the best!