[SOLVED] problem in serial port using 89c2051

Status
Not open for further replies.
M

m2star

Junior Member level 1
Joined
May 1, 2010
Messages
18
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Location
Rawalpindi, Pakistan, Pakistan
Activity points
1,390
i am working on a project, in which i have to receive data serially form PC
and show it on LCD, for this purpose i have to use micro-controller 89c2051
BUT i am facing an annoying problem with serial port,
its is not properly receiving the data which i am sending from PC
i use the following code for bouncing back the received data
but its not not working can anyone help??????????
" 
Code C - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

INITHW();
uchar RByte;
while(1)
    {
        RECByte();
        SNDByte(RByte);
       }
void INITHW()
{
    TMOD=0x20;  //Timer 1, 8-bit auto-reload
    TH1=0xFA;   //4800 baud rate
    //TL1=0xFA;
    SCON=0x50;  //8-bit , 1 stop bit, REN enabled
    TR1=1;      //start timer 1
}
void RECByte()
{
    while(!RI);
    RByte=SBUF;
    RI=0;
}
void SNDByte(uchar SByte)
{
    SBUF=SByte;
    while(!TI);
    TI=0;   
}

"
 
Last edited by a moderator:

try this
Code: 
#include <reg51.h>
main()
{
char c;
// set timer1 in auto reload 8 bit timer mode 2
TMOD=0x20;
// load timer 1 to generate baud rate of 4800 bps
TH1 = 0xFA;
// set serial communication in mode 1
SCON=0x40;
// start timer 1
TR1 = 1;
while(1)
{
// enable reception
REN = 1;
//wait until data is received
while((SCON & 0X02) == 0);
// same as while(RI==0);
// reset receive flag
RI=0;
// read a byte from RXD
c = SBUF;
// disable reception
REN = 0;
 
Reactions: m2star

    M

    m2star

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…