Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] problem in sending AT commands through aubtm-20 bluetooth module

Status
Not open for further replies.
R

rahol

Junior Member level 3
Joined
Sep 13, 2012
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
gujarat/india
Activity points
1,484
hi every one ,


Currently i am working with aubtm-20 bluetooth module. i have buy it from the local electronics shop
.i am facing problem while sending AT commands to the module. i have connected bluetooth module to PC through USB-serial cable. on the hyperterminal side the setting are Baud rate :9600bps ,Databits:8,parity:none,stopbit1, when i power on the module it respond OK on the terminal but when i entered LLL or any AT commands it doesnt respond any thing???

i dont know where i m stuck :(:shock::roll:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top