karthims
Newbie level 5
Actually i am getting problem while trying to receive the incoming sms from gsm modem to micro controller
controller-lpc2148
Uart- UART0 //Cpu clock-60 Mhz (using PLL 12Mhz*5=60Mhz)
VPB -15mhz //9600 baud rate ,8 bit data,1 stop bit,no parity
Enabled interrupt-Rx0
i have attached my code with this thread
controller-lpc2148
Uart- UART0 //Cpu clock-60 Mhz (using PLL 12Mhz*5=60Mhz)
VPB -15mhz //9600 baud rate ,8 bit data,1 stop bit,no parity
Enabled interrupt-Rx0
i have attached my code with this thread