Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem in ATF-34143 lna amplifier design

Status
Not open for further replies.

rajesh navagare

Newbie level 5
Joined
Apr 29, 2015
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
60
i have ATF-34143 .s2p file, .zap file, and footprint (pdf ) also, collected from avago site.. i designed 2 stage amplifier using 2 port s2p block and going to design layout for it.. but i m confused with it bcoz its having 4 pin ic where two sources are given.

if i assign component artwork as package SOT343 for s2p block, it gives me 4 pin IC layout but i m not sure where to use .zap file of ATF343.
i know how to unarchieve .zap file but dont know what to do next ...

.zap file is necessary while designing layout ?
 

*.zap is the old project archive format used in ADS2009 and earlier.
You can import in ADS with File > Unarchive if you want to see what is inside.
Or you can rename to *.zip and unpack with any program that can read *.zip format.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top