Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem in AT commands for FTP

Status
Not open for further replies.
S

syeda amna

Full Member level 4
Joined
Jun 1, 2010
Messages
222
Helped
24
Reputation
48
Reaction score
22
Trophy points
1,308
Location
Pakistan
Activity points
2,551
Hi
I m trying to upload a sample .txt file to an FTP server. It is taking too long to upload an 11 bytes file. No error, still i m unable to upload because of the time.

Also, what will be the format of "AT+FTPPUTPATH= " if i have a file in my D: drive.

AT+SAPBR=3,1,"CONTYPE","GPRS"

OK
AT+SAPBR=3,1,"APN","ufone.internet"

OK
AT+SAPBR=1,1

OK
AT+FTPCID=1

OK
AT+FTPTYPE="A"

OK
AT+FTPSERV="amna.bugs3.com"

OK
AT+FTPUN="xxx"

OK
AT+FTPPW="xxx"

OK
AT+FTPPUTNAME="upload.txt"

OK
AT+FTPPUTPATH="D:"

OK
AT+FTPPUT=1

OK

+FTPPUT:1,1,1360
AT+FTPPUT=2,10

+FTPPUT:2,10

Nothing appeaed after this.
How much time i should wait for AT+FTPPUT=2,10 to respond with 'OK'.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top