Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

probelm on Extension of memory

Status
Not open for further replies.

v.s.n.kumar

Member level 1
Member level 1
Joined
Dec 2, 2013
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
303
Hi,
For example a processor has 11 address lines. so I connect 1k byte of RAM or ROM. but for 11 address lines,its maximum range is 2k bytes of memory. but what happens if processor sends 11bit address means more than 10 bit address(more than 1k byte access). & what it receives.
 

assuming you connect the memory directly to the lower 10 address lines the eleventh line would probably be used as chip select with the memory mapped either to the lower or upper 1k bank. The other bank would address non existent memory.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top