Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Presure sensor info request

Status
Not open for further replies.

tdk

Member level 2
Joined
Sep 2, 2003
Messages
52
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
291
There are some burglar alarm systems they utilize a presure sensor to detect
rush movements of doors-windows etc.
Has anybody such a background to enlight us ?

My regards
 

i think that they are differantial sensors(few mbar)..
differantial pre.sensors has two pipe..any flow causes a variation(increasing of the voltage) in the outputs of the sensor.
 

ok lets imagine the situation like this.the sensor has a learning system which understands the mean power exerted to open or close the the door which it is equipped.but under panic situations a person would def.apply more power to open the door than required mean power.The diffrence in pressure exerted is calculated by the real time program which is running in the sensor equipment.When it understands that the force is more than the required it would give an output as either visual or audio signal.

the mention above terms of power and force shall be refered as physical force exerted by a person
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top