Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Pressure sensor(MPXM2202AS) IC pinout question

Status
Not open for further replies.

Munib

Advanced Member level 4
Joined
Jun 11, 2004
Messages
114
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
1,129
I have got a pressure sensor IC i.e MPXM2202AS. I am confused about the pinout of the IC There is not any pin # 1 identification on the IC.
Plz tell me which is pin # 1.
And also the datasheet talks about only about 4 pins but the IC has five pins.4 of them are on one side and there is a big fifth pin on other side. is this big pin on one side ground or what?
 

**broken link removed**
specifically page 4 for pinout information

with the "big" pin on your right, pin 1 is the top left in ascending order
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top