Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PowerPC MPC8572 development platform for Network Equipment

Status
Not open for further replies.

candy227

Newbie level 4
Joined
Apr 9, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,381
mpc8572 development platform

PowerQUICC III MPC8572 development platform for Networking Communication application
To help the network equipment manufacturers simplify the system design and establish the Intelligent Network application, MICETEK provides MPC8572 development platform, which consists of a reusable processor card and Type-N carrier for Network Communication application.

MT8572-N:
Form Factor: 8.7 inches x 5.8 inches without enclosure
Processor: Freescale PowerQUICC III MPC8572/E dual-core processor, the clock speed of each core ranges from 1.2 GHz up to 1.5 GHz
Memory: Single 512MB DDR2 at 533 MHz with 8 MB of NOR flash and 32 MB NAND flash
Interfaces: 4 x GbE connections, 3 x PCI slots, 1 x PCI-Express x 8 and 1 x RS-232 serial port
Debug: JTAG/COP via an onboard connector
Software: U-Boot bootloader and Linux BSP available

www.micetek.com/englishweb/index_eng.htm
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top