Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

power meter & gaussmeter

Status
Not open for further replies.

jpparmar

Newbie level 5
Joined
Dec 9, 2009
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,291
Location
Pune, India
Activity points
1,362
hey,
what is the difference between power meter and gauss meter?
does gauss meter has any frequency limit?

Please suggest some good power meter for purchase.


thanx
 

Power meter, err, two types? If you ask an electronic engineer what is a powewr meter, he will say its a meter with a selection of load impedances (audio) or a fixed impedance (50 or 75 ohms) for RF. You connect it to your power source and it reads the power. If you pose this question to a power engineer, he will say its a meter that monitors the voltage and current going to some circuit and is calibrated in watts and/or VA.
A gauss meter measures magnetic flux. As the meter has to rely on some sort of transducer to turn the flux into a voltage, it must have a frequency range over which its accurate and an extended range where it would indicate, rather then measure.
Frank
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top