Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Power Gating - Power Switches

Status
Not open for further replies.

alam4vlsi

Member level 1
Joined
Sep 12, 2013
Messages
40
Helped
8
Reputation
16
Reaction score
7
Trophy points
8
Activity points
220
How can we calculate number of power switches should be used in power gating technique for a design?
 

All I know about power switches is that any power switch should be able to handle the current neede by the load which it is controlling. Please if I am wrong correct me.
 

I found the answer for it....:)

Minimum no of power switches = ( Switch Resistance * Domain Current Consumption)/ Switch Voltage Drop
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top