Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

power divider with harmonic supression

Status
Not open for further replies.

Nicholas_UTM

Newbie level 4
Joined
Jan 9, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,348
I manage to design a 2-way wilkinson power divider with the 3rd harmonic supression.below are the results..
f0=3GHz
3f0=9GHz
AT 3GHz
S11=-30dB
S22 & S33=-28dB
S12,S21,S13,S31=-3.01dB
S23&S32=-26dB

AT 9Hz
S11=-.07dB
S22 & S33=-dB
S12,S21,S13,S31=-24dB
S23&S32=-6dB

Are the results good enough. The design of the power divider was carried out by modifiying the transmission line into coupled lines.
by the way,can someone give me the URL to get buy chip resistor online..
thk for the help[/b]
 

Nicholas_UTM said:
I manage to design a 2-way wilkinson power divider with the 3rd harmonic supression.below are the results..
f0=3GHz
3f0=9GHz
AT 3GHz
S11=-30dB
S22 & S33=-28dB
S12,S21,S13,S31=-3.01dB
S23&S32=-26dB

AT 9Hz
S11=-.07dB
S22 & S33=-dB
S12,S21,S13,S31=-24dB
S23&S32=-6dB

Are the results good enough. The design of the power divider was carried out by modifiying the transmission line into coupled lines.
by the way,can someone give me the URL to get buy chip resistor online..
thk for the help[/b]

AT 3GHz
S11=-30dB ----------->Good input match
S22 & S33=-28dB--------->Good output match
S12,S21,S13,S31=-3.01dB--------->(Good) almost lossless, air substrate??
S23&S32=-26dB--------->Good isolation

AT 9Hz
S11=-.07dB---------->High Reflection
S22 & S33=-dB------>???????
S12,S21,S13,S31=-24dB--------->Not bad
S23&S32=-6dB------------->lossless??



:!::?::idea:
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top