You did not answer my questions. I do not see anything useful in that plot.Where are your assumptions list? Antenna impedance s-parms, diode s-parms.
Do you know that the assumption in MPT is matched conjugate impedance?
What do you need to learn in order to do this? (search GPT)
What is the antenna impedance, BW etc?
Pls cite reference to plot
So, here is the thing, whenever i try to put any type of probe between the source and the circuit, it shorts. I really am stuck on what to do now.Pin is Available Power from the Source, NOT Input Power. These Power are different because there is generally Mismatch Losses between the Source and the Circuit.
Also, you forgot the frequency index. You should define your frequency index-for instance-
Efficiency_Percentage=(P_Probe2[1] / P_Probe1[1]) *100
P_Probe1 is Power Meter that will be placed between the Source and the Circuit.
Why you use Differential Power Probe ?? This is not necessary.So, here is the thing, whenever i try to put any type of probe between the source and the circuit, it shorts. I really am stuck on what to do now.
ooh it works, thank you.Why you use Differential Power Probe ?? This is not necessary.
View attachment 187797
View attachment 187798
"Thanks for catching that! You're absolutely right, I just copied the parameter value from the schematic without fully understanding its impact. I'm still new to this area and trying to learn on the fly. Your suggestions are invaluable, and I'll definitely be digging deeper into them to get a better grasp. Can you maybe point me towards some resources to start with?"Why is order = 1 for a harmonic balance simulation?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?