Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

power analysis of circuits using cadence virtuoso

Status
Not open for further replies.

u.saravanan

Newbie level 4
Joined
Oct 22, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india-TN
Activity points
1,327
Power analysis

anybody can tell me how to calculate the power analysis of circuits using cadence virtuoso. give the procedure and steps, both ac and dc analysis.
thank you
 

Jack// ani

Advanced Member level 3
Joined
Dec 2, 2004
Messages
759
Helped
106
Reputation
220
Reaction score
58
Trophy points
1,308
Activity points
5,018
Power analysis

Assuming you have NCSU_Analog_Parts loaded, there is a component by name Power Meter.

With that you can measure power for load capacitance, just make sure you have set initial conditions for simulation to converge.
 

u.saravanan

Newbie level 4
Joined
Oct 22, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india-TN
Activity points
1,327
Re: Power analysis

Jack// ani said:
Assuming you have NCSU_Analog_Parts loaded, there is a component by name Power Meter.

With that you can measure power for load capacitance, just make sure you have set initial conditions for simulation to converge.
Sorry i cant understand. In my cadence virtuoso dont have any NCSU type library. which is inbuild or not. then i need complete step of that. coz i am very fresher to this.

thank you.
 

u.saravanan

Newbie level 4
Joined
Oct 22, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india-TN
Activity points
1,327
Re: Power analysis

In my tools, i dont have NCSU_analog_parts. Is it default library file.
What is gpdk library.
COZ i am very very fresher to this tool.
I need complete steps and procedure.
Pls help me. and one more thing i designed and simulate 11 inverter ring oscillator, i applied 5 volt dc power supply. how can i calculate tphl, tplh, thd, and power dissipation, and power delay. And what is the use of calculator, and how can i use it for to plot different analysis.

thans in advance.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top