ice82
Newbie level 5
potyo2
hi!
from schematics I know that the 20MHz crystal have to be connected to pic18f4550 (pin_13 and pin_14) and 2 22pf ceramic capacitors are required. Then the 18f4550's CLKO pin feed the pic16f877a's CLKI input
this is ok but the configuration bits inside icd2_18f4550_boot.hex and icd2_16f877a_boot.hex make me a bit confused... 16f877a oscillator is set to HS and 18f4550 oscillator is set to EC+clockout
is this right?
thanks
-ice-
hi!
from schematics I know that the 20MHz crystal have to be connected to pic18f4550 (pin_13 and pin_14) and 2 22pf ceramic capacitors are required. Then the 18f4550's CLKO pin feed the pic16f877a's CLKI input
this is ok but the configuration bits inside icd2_18f4550_boot.hex and icd2_16f877a_boot.hex make me a bit confused... 16f877a oscillator is set to HS and 18f4550 oscillator is set to EC+clockout
is this right?
thanks
-ice-