Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Post layout simulations in ADE L virtuoso using Eldo

Status
Not open for further replies.
V

viperpaki007

Full Member level 5
Full Member level 5
Joined
Jul 2, 2008
Messages
274
Helped
11
Reputation
22
Reaction score
8
Trophy points
1,298
Location
Finland
Visit site
Activity points
3,437
Hi,

I am trying to do post layout simulations of a circuit in Virtuoso ADE-L using ELDO. The layout extracted netlist was generated using Starrcxt tool. Now how can add this extracted netlist in ADE to get post layout simulation results?

regards
 

If this netlist has been created in spectre format, it's easy..
Run spectre in terminal mode with options.For more information see spectre help..
 

No the extracted netlist has been generated in ELDO format. Is there any way to simulate the ELDO format netlist in ADE L?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top