Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

plz help me for the switching of TRIAC

Status
Not open for further replies.

atifbuitms

Newbie level 4
Joined
Jul 3, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
pakistan
Activity points
1,314
i have a 2 main line of 220 Volt AC Supply.i want to control it and i want to work
1 line at a time and 2nd is off while 2 is working than 1 line is off.i use a
Triac in the phase of the both line which are parallel.
we give a 4 volt +ve only one gate at a time and 2nd is off.

plz tell me this diagram is true and in this way can we handle it(220 AC)?
and tell me the Triac number which can u use for this purpose.


plz urgant reply

and see the attechment pic


https://images.elektroda.net/48_1278159836.jpg
 

kabiru

Banned
Joined
Nov 22, 2009
Messages
503
Helped
160
Reputation
320
Reaction score
146
Trophy points
1,323
Location
Nigeria
Activity points
0
Hi,your circute will work but you need to use pull down resistor to ground for more stability, and for the value of the triac you can simply use BT136 please refer to it's datasheets for more information.
 

atifbuitms

Newbie level 4
Joined
Jul 3, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
pakistan
Activity points
1,314
kabiru said:
Hi,your circute will work but you need to use pull down resistor to ground for more stability, and for the value of the triac you can simply use BT136 please refer to it's datasheets for more information.


u have any idea about this component ?

Mouser part number 576-Q6010L5

can we use it?
 

atifbuitms

Newbie level 4
Joined
Jul 3, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
pakistan
Activity points
1,314
kabiru said:
Hi,your circute will work but you need to use pull down resistor to ground for more stability, and for the value of the triac you can simply use BT136 please refer to it's datasheets for more information.



plz tell me about the pull down network of resister.

and also tell me the resister value and its wattage.
 

kabiru

Banned
Joined
Nov 22, 2009
Messages
503
Helped
160
Reputation
320
Reaction score
146
Trophy points
1,323
Location
Nigeria
Activity points
0
Hi, you can simply use 10k resistor to ground.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top