Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Pls help me understand sinusoidal jitter

Status
Not open for further replies.

neoflash

Advanced Member level 1
Joined
Jul 2, 2005
Messages
492
Helped
10
Reputation
20
Reaction score
2
Trophy points
1,298
Activity points
4,759
Below is what I found in google. But does not explain much to me...

SJ (Sinusoidal Jitter):
Sinusoidal Jitter has a periodic form and is related to (engendered by) the data patterns in the system. Sinusoidal Jitter is a component of the Deterministic Jitter.


many thanks.

Added after 19 minutes:

someone said that sinusoidal jitter is period jitter? right or wrong?
 

For a simple concept, there are many misconceptions about what exactly jitter is, and its definition varies depending on whom you ask.
Jitter is commonly defined as “The deviation from the ideal timing of an event".

..

Periodic jitter is another term for sinusoidal jitter.

Here is the link to: "An eye-opening look at jitter"
**broken link removed**

Regards,
IanP
 

jitter of a sine wave represents the variation in its zero crossing in the time domain.

this corresponds to phase noise in frequency domain.
 

koushikr_in said:
jitter of a sine wave represents the variation in its zero crossing in the time domain.

this corresponds to phase noise in frequency domain.

really?
 

"component of the Deterministic Jitter", jeez someone please shoot the knurds!

Sinusoidal jitter is time jitter caused by something repeatable, like noise from a switching power supply or noise caused by mechanical vibration (a fan running at a certain speed, an antenna tower vibrating in the wind), etc.
 

    neoflash

    Points: 2
    Helpful Answer Positive Rating
so, shall we see spur in spectrum if there is sinusoindal jitter? thanks
 

freq spectrum is affected by jitter, is it needed to proove?
**broken link removed**
 

i just want to verify that why it is named as sinuisoidal jitter.
 

period is sin when substract average period
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top