Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PLL loop filter design

Status
Not open for further replies.

hmsheng

Full Member level 4
Joined
Dec 17, 2003
Messages
219
Helped
26
Reputation
52
Reaction score
10
Trophy points
1,298
Location
China
Activity points
1,556
pll filter tools

I want to simulate a PLL and the loop filter parameters need to be calculated automatically according to bandwidth and phase margin. The loop filter is a 3rd order passive loop filter. The attached is a good tool to calculate the loop filter. But I need to do calculation in my program. So does anyone know the equations used by the tool to calculate the 3rd order passive loop filter?
 

pll loop filter design program

you can search this forum for many thesis on pll's or you can refer to any of the hundreds of thesis on PLL's on the web.


Thanks
Amarnath
 
  • Like
Reactions: pretha

    pretha

    Points: 2
    Helpful Answer Positive Rating
pll loop filter design tool

Google deansbook.pdf for a decent reference written by the author(?) of the NatSemi WebBench program.
 
  • Like
Reactions: kalbun

    kalbun

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top