Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

plese help me to design rfid tag

Status
Not open for further replies.

walkman

Member level 1
Joined
Jul 24, 2010
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
hyderabac
Activity points
1,532
hi,
my project is designing of our own rfid tag. we already have reader with 125khz so now i want to develop tag. i searched many websites but i didnt find any information regarding design of rfid tag.if any one have information about rfid tag design please send to my mail.and if anyone knows desiging of tag please help me
 

WimRFP

Advanced Member level 5
Joined
Apr 16, 2010
Messages
1,591
Helped
594
Reputation
1,176
Reaction score
536
Trophy points
1,393
Location
Netherlands
Activity points
15,026
Hello,

Antenna design only, or also the electronics to mimic an actual chip? Other things: environmental aspects, size, expected reading range, what protocol and or brand reader, etc.
 

walkman

Member level 1
Joined
Jul 24, 2010
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
hyderabac
Activity points
1,532
Hello,

Antenna design only, or also the electronics to mimic an actual chip? Other things: environmental aspects, size, expected reading range, what protocol and or brand reader, etc.

thanks for your reply.i need all parameter like what type of antenna is used in rfid tag,what type of memory used in that tag,how the data stored permanently in the passive tag with out any power supply.so please send me entire details of how to design rfid id tag if you have a reader
 

WimRFP

Advanced Member level 5
Joined
Apr 16, 2010
Messages
1,591
Helped
594
Reputation
1,176
Reaction score
536
Trophy points
1,393
Location
Netherlands
Activity points
15,026
I think you should consult a book on RFID, check the websites of microcontrollers (AVR, microchip, etc) and websites of manufactures (TI, EM microelectronics, melexis, feig, etc).
 

hossam abdo

Full Member level 2
Joined
Mar 13, 2011
Messages
123
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Alexandria, Egypt, Egypt
Activity points
2,075
Dear walkman

if you mean "ASIC Design for RFID tag". then you need to determine the standard you must follow in your design because of the reader must be authenticated with the tag.
for detailed information about RFID "RFID handbook"

**broken link removed**

regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top