Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

please share your exprience of using HCTL-2032

Status
Not open for further replies.

EEHobby

Newbie level 6
Joined
Dec 28, 2005
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,391
Any body has used Agilent HCTL-2032? I have encoder A and B input, but I can not get output pulse at CNTDECx and U/Dx. The clock I am using is from a micro controller crystal oscillator. There is a DC component. Its peak to peak is about 2V. It is 10MHz. I don't know if the problem comes from the clock or not. Thank you very much for your help.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top